Quadrix Energy Ltd: Products: Elweco

Business
Contact Us Corporate Media Products Services

Information
Case Studies Tutorials Calculators Formulae Downloads Statistics

SHW Training
Seminars Course Content Certification

Dealer Information
Register

Quick Links
EECA Energy Federation WEC Energy Commission Solar Ind Assoc NZPV Association

You are here: Home /Products /Elweco /Specifications /Data Sheet 1

SPECIFICATIONS

BASIC OUTPUT models with no amplifiers. The parameters are stable but vary among units. An equation with typical values is: eo = 2.5 + 2.6 sin Q
Normally these versions require individual calibration by the user, using either software or calibration amplifiers.

INPUT VOLTAGE RANGE	+ 4.5 to + 6.0 Vdc
Rated voltage for data specifications	+ 5.000 +/- 0.025
INPUT CURRENT	9.0 ma
These Basic Output Types may be operated in a special low current mode to reduce power supply current to be as low as 20 microamperes. Consult us for assistance.
OUTPUT SIGNAL	One complete sine wave per revolution
INPUT VOLTAGE RANGE	+ 4.5 to + 6.0 Vdc
Rated voltage for data specifications	+ 5.000 +/- 0.025
INPUT CURRENT	9.0 ma
These Basic Output Types may be operated in a special low current mode to reduce power supply current to be as low as 20 microamperes. Consult Elweco, Inc for assistance.
OUTPUT SIGNAL	One complete sine wave per revolution

Important Announcement Regarding Email